軸受は資源になるのか。
ために分散、発注すること。
がまんがえる、です。
ブラック ホール径が、ソフトボールの大きさで、
太陽引力の４千万倍あるとか。
鉱物でないと、わかるかなぁ―
ttp://ieba.dee.cc/Wikipedia%253A%25E7%25B4%25A2%25E5%25BC%2595_%25E3%2581%2599%25E3%2581%25B8/ieba70.html 6 田中正人 200 7 柴山隆之 200 8 岩井善郎 200
12 村上 150 13 照井琢磨 150 14 松尾昌憲 150
15 松田浩一 150 19 雉本信哉 100 21 矢部 寛 100
23 平山朋子 100 24 福田 100 25 白石俊彦 100
27 東畑 透 100 28 池森 寛 100 29 須賀茂幸 100
30 森早 苗 100 31 森下 信 100 32 松村芳樹 100
33 小澤 豊 100 34 佐藤美洋 100 35 高井 精 100
36 金武直幸 100 37 金光陽一 100 39 岡田庸敬 100
40 稲垣瑞穂 100
ひっしになって、いのちがけで、
塵・塵・塵・塵・塵・塵・塵
をとりのぞくかなきゃーー
へぇ〜〜
拡張領域と環境保蔵の海域を、
中国大陸の人たちが、
自己生活の利益のために、
一網打尽に無作為に捕っていく。
SAVE THE FUTURE
ttp://www.iucn.org/ 上記のようなのあったけれど、
専門屋さんがいるから、心配いらないよー。
うすら、馬鹿な議員がいる。
ttp://www.nist.gov/index.html プレロードの不適切などは関係ないの？
砂の文言で作文したのでは？
砂は入らない。
製品に何か問題が？
ttp://www.google.com/patents ttp://www.google.com/patents?id=nVcAAAAEBAJ&dq=Japan,+%E2%80%9Dbearing%E2%80%9D%E3%80%80 ttp://www.google.com/patents?tbs=bks%3A1&tbo=1&q=Bearing&btnG=Search+Patents Thrust Bearing
ttp://www.google.com/patents?tbs=bks%3A1&tbo=1&q=Thrus%EF%BD%94+Bearing+%E3%80%80&btnG=Search+Patents 大豆・小麦・その他の穀物・貴金属など投機に走る傾向にあり！
ありがとう。
ttp://kibo.tksc.jaxa.jp/ Sliding Bearing of Screw Compressors (1st Report)
Load-Carrying Capacity of Spiral Groove Bearings [in Japanese]
Sliding Bearing of Screw Compressors (2nd Report)
Experiment on Spiral Thrust Groove Bearing．[in Japanese]
This paper targets at making of sliding bearing for
hermetic screw compressor．
In this paper, we carried out experiments on the performances
of thrust bearing for screw compressor．
Siding bearing of the study is a disk thrust bearing．
Sliding Bearing of Screw Compressors (3ed Report)
Experiment on Spiral Thrust Groove Bearing．[in Japanese]
This paper, the sliding thrust bearing used to develop of
the hermetic screw compressor.
A sliding thrust bearing used in the hermetic screw compressor
was tested. Used in this study, the bearing sliding
of disk type thrust bearings.
About a bearing.
軸受について
その代わりパケホは必須だが
Sliding Bearing of Screw Compressors (4th Report)
Spiral bearing of friction coefficient by about
By a treatise, the sliding spiral groove thrust bearings by testing.
The bearing of theses etc, the radius groove,
groove of the cascades, the ribbon groove,
the inflow groove, the outflow groove,
by bearing efficiency tested.
Sliding Bearing of Screw Compressors (4th Report)
Spiral bearing of friction coefficient by about
By a treatise, the sliding spiral groove thrust bearings by testing.
The bearing of theses etc, the radius groove,
groove of the cascades, the ribbon groove,
the inflow groove, the outflow groove,
by bearing efficiency tested.
Sliding Bearing of Screw Compressors (5th Report)
The spiral groove bearing by the influence of the groove depth
The ribbon bearings can reversibly rotated,
By the Ribbon type spiral-grooved thrust bearings, bearing-load
by in this paper, was verified as a testing.
Sliding Bearing of Screw Compressors (6th Report) :
Effect of the groove depth to coefficient of friction of spiral groove bearings．
In this the paper presents a study on reversible rotating
Spiral grooved thrust bearings (SGB) named 'Ribbon type bearing'.
It is lubricated by a forced injection of liquid in order to
reduce a bearing starting torque.
Thus, compared with a conventional hydrodynamic SGB,
the Ribbon type bearing achieves higher load capacity
and lower bearing loss by the assistance of hydrostatic action.
Sliding Bearing of Screw Compressors (7th Report) :
Effect of bearing groove arrangement on cooling effectiveness of thrust bearings．
In this the report, cooling effectiveness of sliding thrust bearing with forced
lubrication system for screw compressor is studied.
Lubricant heat generated at bearing surface is partly mixed with and dissipated
by fresh lubricants through bearing grooves and the rest is carried over to
the next bearing surface.
Effect of the bearing groove arrangement of the thrust bearing on cooling
effectiveness is experimentally investigated.
Sliding Bearing of Screw Compressors(８th Report)
Temperature distribution of spiral thrust groove bearing
Thermodynamic analysis of the bearing at the Excel spreadsheet by can to using.
In this the paper, using the Excel spreadsheet thermodynamic analysis at
the ribbon bearing the simulation temperature.
jglobal.jst.go.jp/public/20090422/200902241269745672
Sliding Bearing of Screw Compressors (９th Report)
About the oil film pressure of the spiral groove bearing
The bearing at hydrodynamic be able to analysis the bearing
at using the Excel spreadsheet.
In this the paper, a numerical analysis of hydrodynamic thrust
bearing at the spiral groove the Excel spreadsheet to report
the calculation of oil film pressure.
Sliding Bearing of Screw Compressors(10th Report)
By spiral-groove-runner provided into the bearing device,
is doing testing for coefficient of friction.
In this the paper, researches concerning the groove condition
of spiral-grooved thrust runner on bearing.
ttp://jglobal.jst.go.jp/public/20090422/200902283326989138 Sliding Bearing of Screw Compressors (11th Report)
Experimental study on spiral-groove type thrust bearings for
screw compressors by use of refrigerant-blended lubricant．
Tests were conducted using refrigerant-blended lubricant
simulating real conditions. Test results showed reasonable
bearing characteristics.
ttp://web.kanazawa-u.ac.jp/~asiatrib/FinalProgram.pdf Sliding Bearing of Screw Compressors(12th Report)
Testing study on spiral-groove type thrust bearings for
screw compressors by use of refrigerant-blended lubricant．
This report presents the test results of the ribbon type
bearing performance using real lubricant, blend of oil and
refrigerant．
Sliding Bearing of Screw Compressors (13th Report) :
Thrust bearings for screw compressors, experiment
by use of refrigerant blended lubricant.
In this paper, shown the testing of the ribbon type bearing performance using
and real lubricant or by using of refrigerant blended lubricant oil.
ttp://jglobal.jst.go.jp/public/20090422/200902240771454065 Sliding Bearing of Screw Compressors (14th Report)
The friction measurement on spiral groove type thrust bearings use of refrigerant
The objective of this paper is to design development sliding plain bearings
for hermetic screw compressors. The tests were carried out to obtain the data
for bearing performance operating at an actual condition of refrigerant-blended lubricant.
ttp://ci.nii.ac.jp/naid/110007085448 Sliding Bearing of Screw Compressors (15 Report)
Frictional temperature of slide thrust bearing of screw compressor
The tests were carried out to obtain the data for bearing performance operating at
an actual condition of refrigerant-blended lubricant.
The thrust bearing used here is a groove type bearing with grooves on
the runner and plane surface for the stationary side.
ttp://ci.nii.ac.jp/naid/110007082908 Counterclockwise possible spiral groove thrust slide temperature
and film thickness with relationship．
Using refrigerant-blended-lubricating-oil was measured in the direction of
counterclockwise of the characteristics at slide-thrust-Ribbon-type-bearings.
ttp://ci.nii.ac.jp/naid/110007709656 Sliding Bearing of Screw Compressors (17th Report) :
At the refrigerant used in the sliding bearing of counter clock wise
when the sliding bearing characteristic．
The objective of this paper is to design development sliding
a plane parallel surface bearings for hermetic screw compressors．
The thrust bearing used here is a groove type bearing
with grooves on the runner and plane surface for the stationary side．
This configuration of the bearing is named ‘Ribbon-Type-Bearing’.
The ribbon type bearing is intended to achieve higher load capacity
and the low bearing loss by the pumping effect and cooling effect of
the both types of grooves in comparison with a conventional spiral groove bearings．
ttp://jglobal.jst.go.jp/public/20090422/200902272333391190 Sliding Bearing of Screw Compressors (18th Report)
Counterclockwise by the refrigerant for sliding thrust bearing
of friction torque.
Ribbon runner sliding thrust bearings that are reverse, using the mixed refrigerant lubricant oil.
To counterclockwise of the Ribbon runner sliding thrust bearings that revolve, using to
the refrigerant blended lubricant oil.
The bearing inner diameter is go the injection lubrication on by the refrigerant blended lubricant oil.
The bearing-load and refrigerant-quantity of refrigerant blended lubricant oil, at each parameter
was measured bearing characteristics.
ttp://jglobal.jst.go.jp/detail.php?JGLOBAL_ID=200902274531405654&qcompulsion Sliding Bearing of Screw Compressors (19th Report)
Ribbon-type-bearing characteristics oｆ reversible rotation
For tested, Ribbon-type-bearing of the examined the operating characteristics.
By Rotated circumstances of ribbon runner side, the clock wise 1500rpm from,
the counter clock wise1500rpm, each measured for distance.
年金支給額を減らす、前に国会議員減らせ！
年金支給額を減らす、前に国会議員減らせ！
国会議員減らせ！
国会議員減らせ！
6Φですか？
伝導工具屋さんあたってみれば？
それか逆にユアサ商事とか
Sliding Bearing of Screw Compressors (20th Report)
Sliding Thrust Bearing at the Bi-rotational Behavior Characteristics
Ribbon thrust-bearing is the hydrodynamic.
The hydrodynamic thrust-bearing,
composed inflow type spiral-grooves combined with inner-radial-grooves for screw-compressor．
At refrigerant-blended lubrication condition and bi-rotational operating condition is testing．
Test results showed reliable and reasonable bearing-performance in terms of bearing-film -thickness,
bearing-temperature and friction-torque．
Sliding Bearing of Screw Compressors (21st Report)
The Operating Characteristics of Flat Sliding Thrust Bearings by the Bi-Rotational．
Of starting in rotation, injection lubrication of the refrigerant-blending lubricant
oil was applied into reduce on friction-torque．
Injection lubrication of the refrigerant-blending lubricant oil
was applied into reduce on friction-torque．
With the combination effectively of spiral-grooves
and radial-grooves ones was to put on the slid runner surface.
The depth of the each grooves are 0.10mm.
The bearing is bearing-outer diameter φ80mm and bearing-inner
diameter φ40mm.
Sliding Bearing of Screw Compressors (22nd Report) :
The Ribbon Bearing Type of the Bi-rotational Behavior Characteristics.
The ribbon-bearing is possible that the bi-rotational.
Despite the parallel-plate-bearing of Ribbon-bearing ,
the bi-rotational and can to operator safely.
Oil Film thickness and bearing temperatures and friction torque
were tested measured.
Synthetic-oil was used as the lubricant.
The tests were carried using refrigerant-blended-lubricant.
Refrigerant-blended-lubricant is blending-ratio of 6wt%, 10wt%
and 44wt%.
Simulate is the real state of the refrigerator-compressor.
The ribbon-bearing is possible that the bi-rotational.
Despite the parallel-plate-bearing of Ribbon-bearing ,
the bi-rotational and can to operator safely.
Oil Film thickness and bearing temperatures and friction torque
were tested measured.
内部化で治まるはず。
コミュニケーション特定の幸福。
心よりお見舞いを申し上げますとともに、
被災地が一日も早く復興することを
お祈り申し上げます。
ねじ圧縮機のすべり軸受（第23報）
すべり軸受表面の摩擦温度の検討
Sliding Bearing of Screw Compressors (23th Report)
Study in the temperature of the surface friction
at on the sliding bearings.
MATSUO Masanori
The Open University of JAPAN
www.kansai.jsme.or.jp/soukai86/pdf/86soukai_program.pdf
Where is the bearing
Where is the bearing
What's up bearing
What's up bearing
US3520579 (A),
filed (unknown) ,
published Jul 14, 1970 - HITACHI LTD
これでいいのか！
ttp://www.dwd.de/wundk/spezial/Sonderbericht_loop.gif ttp://www.icone19.org/ ttp://www.jsme.or.jp/publish/kaisi/kai1104.htm 日本機械学会誌
２０１１年 ４月号（第１１４巻、第１１０９号）
●解説
【原子力発電】
原子力ルネサンスの最前線と人材育成教育
発電所3号機の運転開始と環境対策への取り組み
ABWRとAP1000TMの世界展開
ABWRの建設と世界市場への展開─そして世界へ
PWRのグローバル展開
ttp://www.jsme.or.jp/publish/kaisi/kai1104.htm ttp://www.spiegel.de/wissenschaft/technik/bild-752242-192707.html 我々はボーグになりたいか？
武器に対応・適合する能力があるので、同じ武器は数回しか通じず、倒しても次々と他のドローンが転送されてくるので、襲撃を受けた場合、ほぼ同化は免れない
『スタートレック』シリーズに登場する、機械生命体の集合体について記述しています。
ttp://ja.wikipedia.org/wiki/%E3%83%9C%E3%83%BC%E3%82%B0#.E3.83.9C.E3.83.BC.E3.82.B0.E3.83.BB.E3.83.86.E3.82.AF.E3.83.8E.E3.83.AD.E3.82.B8.E3.83.BC 
ttp://ja.wikipedia.org/wiki/%E3%83%95%E3%82%A1%E3%82%A4%E3%83%AB:Stexp_lv_borg.jpg Fukushima News Special
ttp://www.google.com/search?hl=en&source=hp&biw=875&bih=524&q=nature&aq=0&aqi=g10&aql=&oq= ttp://www.nature.com/nature/index.html 落穂拾いとは、未亡人や流浪のためだけ残された落穂を拾う権利をいう
ttp://techon.nikkeibp.co.jp/article/CAMPUS/20100729/184687/ たいへんだべぇー
ほんと
お金がもうけ
マークーone
地震直後の東電本店から福島第１への
運転指令の記録を知りたいです。
必要な装置・機構であり、
緊急炉心冷却装置などは原子炉の安全性を保つ上で
重要な装置・機構です。
ttp://www.fepc.or.jp/learn/hatsuden/nuclear/genshiro/index.html 冷却水を循環するのに電動ポンプが必要なんだって！
電動ポンプに通電されないと！？
ttp://scienceportal.jp/HotTopics/interview/interview62/02.html ttp://musyoku.com/bbs/view/1300175067/1200-1299 ttp://www.asyura2.com/11/genpatu7/msg/599.html ttp://blog.goo.ne.jp/uhi36845-002/e/9ded1b48a2763e328e47df406e47d6d9 おっかねぇーんだぁー！
民間の資金調達どうなる。
日本企業の海外移転へ、どうなる。
民間のお金の流れを強めること。
お金の流れの関を排除すること。
5年間無税にする。
安全性とリスクの明確化
都市で得る利益と地方での劣悪な損失
ELSI(ｴﾙｼｰ)
Duke University
地底300mより深く原子力発電所を建設して
From the Fukusima first nuclear power plant,
154TBq/day of radioactivity has been released.
ずいぶん昔だが、広島のお方が、毎日飲んでいるのをNHK-TVで放映していた。
こう薬があるのですかぁー。
ドクダミ（？草、学名：Houttuynia cordata）はドクダミ科ドクダミ属の多年草。 別名、ドクダメ（毒溜め）、
ttp://ja.wikipedia.org/wiki/%E3%83%89%E3%82%AF%E3%83%80%E3%83%9F 東京大学
東京大学大学院工学系研究科
原子力専攻
原子力国際専攻
アイソトープ総合センター
放射線管理室
環境安全本部
学会関係
日本原子力学会
日本保健物理学会
学友会
研究機関等
日本原子力研究開発機構
東京電力
放射線医学総合研究所
ttp://www.n.t.u-tokyo.ac.jp/kosako/modules/link/ お気の毒、全て喪失なの
最初から、空気・水による水冷タワー塔による循環冷却だよ！
水にホウ酸を添加しておく。
ttp://sankei.jp.msn.com/affairs/news/110503/dst11050300210001-n1.htm 